R3303-HP HSR6800 Routers MPLS Configuration Guide

195
VC ID Intf ID State VC Label VC Label
20 S2/1/1 -- up 1033 1026
# Display VC information on PE 3. The output shows that a VC has been established on PE 3.
<PE3> display mpls l2vc
Total ldp vc : 1 1 up 0 down 0 blocked
Transport Client Service VC Local Remote
VC ID Intf ID State VC Label VC Label
30 S2/1/1 -- up 1050 1027
# Ping CE 2 from CE 1. The operation succeeds.
[CE1] ping 100.1.1.2
PING 100.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=30 ms
Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=60 ms
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=50 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=40 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=70 ms
--- 100.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/50/70 ms
# From CE2, ping subnet 100.3.1.0/24 connected to CE1. The ping operation succeeds.
[CE2] ping 100.3.1.1
PING 100.3.1.1: 56 data bytes, press CTRL_C to break
Reply from 100.3.1.1: bytes=56 Sequence=1 ttl=255 time=30 ms
Reply from 100.3.1.1: bytes=56 Sequence=2 ttl=255 time=60 ms
Reply from 100.3.1.1: bytes=56 Sequence=3 ttl=255 time=50 ms
Reply from 100.3.1.1: bytes=56 Sequence=4 ttl=255 time=40 ms
Reply from 100.3.1.1: bytes=56 Sequence=5 ttl=255 time=70 ms
--- 100.3.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/50/70 ms
# Execute the mpls l2vc switchover command on PE 1 to switch the working VC.
<PE1> system-view
[PE1] interface serial 2/1/0
[PE1-Serial2/1/0] mpls l2vc switchover
[PE1-Serial2/1/0] quit
# Display VC information on PE 1. The output shows that the backup VC is now up.
[PE1] display mpls l2vc
Total ldp vc : 2 1 up 0 down 1 blocked
Transport Client Service VC Local Remote