R3303-HP HSR6800 Routers MPLS Configuration Guide

196
VC ID Intf ID State VC Label VC Label
20 S2/1/0 -- blocked 1026 1033
30 S2/1/0 -- up 1027 1050
# CE 1 and CE 2 can ping each other.
[CE1] ping 100.2.1.2
PING 100.2.1.2: 56 data bytes, press CTRL_C to break
Reply from 100.2.1.2: bytes=56 Sequence=1 ttl=255 time=30 ms
Reply from 100.2.1.2: bytes=56 Sequence=2 ttl=255 time=60 ms
Reply from 100.2.1.2: bytes=56 Sequence=3 ttl=255 time=50 ms
Reply from 100.2.1.2: bytes=56 Sequence=4 ttl=255 time=40 ms
Reply from 100.2.1.2: bytes=56 Sequence=5 ttl=255 time=70 ms
--- 100.2.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/50/70 ms
# CE 2 can still ping subnet 100.3.1.0/24.
[CE2] ping 100.3.1.1
PING 100.3.1.1: 56 data bytes, press CTRL_C to break
Reply from 100.3.1.1: bytes=56 Sequence=1 ttl=255 time=30 ms
Reply from 100.3.1.1: bytes=56 Sequence=2 ttl=255 time=60 ms
Reply from 100.3.1.1: bytes=56 Sequence=3 ttl=255 time=50 ms
Reply from 100.3.1.1: bytes=56 Sequence=4 ttl=255 time=40 ms
Reply from 100.3.1.1: bytes=56 Sequence=5 ttl=255 time=70 ms
--- 100.3.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/50/70 ms
Example for configuring Kompella MPLS L2VPN
Network requirements
CEs are connected to PEs through Serial interfaces. The link layer encapsulation protocol is PPP.
Establish a Kompella VC, so CE 1 and CE 2 can exchange Layer 2 packets across the backbone.