R3303-HP HSR6800 Routers MPLS Configuration Guide

199
connections: 1 up, 0 down, 0 local, 1 remote, 0 unknown
CE name: ce1, id: 1,
Rid type status peer-id route-distinguisher intf
2 rmt up 3.3.3.9 100:1 S2/1/0
# Ping CE 2 from CE 1. The output shows that CE 1 and CE 2 can ping each other.
[CE1] ping 30.1.1.2
PING 30.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 30.1.1.2: bytes=56 Sequence=1 ttl=255 time=90 ms
Reply from 30.1.1.2: bytes=56 Sequence=2 ttl=255 time=77 ms
Reply from 30.1.1.2: bytes=56 Sequence=3 ttl=255 time=34 ms
Reply from 30.1.1.2: bytes=56 Sequence=4 ttl=255 time=46 ms
Reply from 30.1.1.2: bytes=56 Sequence=5 ttl=255 time=94 ms
--- 30.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 34/68/94 ms
Example for configuring a Kompella local connection
Network requirements
Create a Kompella local connection on the PE, so the PE can directly forward packets between CE 1 and
CE 2 without looking up the forwarding table, improving the forwarding speed.
Figure 51 Network diagram
Configuration procedure
1. Configure the PE:
# Configure basic MPLS. (Details not shown.)
# Configure the L2VPN and the CE connection.
<Sysname> system-view
[Sysname] sysname PE
[PE] l2vpn
[PE-l2vpn] mpls l2vpn
[PE-l2vpn] quit
[PE] mpls l2vpn vpn1 encapsulation ppp