R3303-HP HSR6800 Routers MPLS Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis

251

252

253

254

255

256

257

258

259

260

244

[ASBR1-bgp] quit

[ASBR1] route-policy map permit node 10

[ASBR1-route-policy] apply mpls-label

[ASBR1-route-policy] quit

3. Configurations on ASBR 2:

# Configure basic MPLS.

<Sysname> system-view

[Sysname] sysname ASBR2

[ASBR2] interface loopback 0

[ASBR2-LoopBack0] ip address 3.3.3.3 32

[ASBR2-LoopBack0] quit

[ASBR2] mpls lsr-id 3.3.3.3

[ASBR2] mpls

[ASBR2–mpls] quit

[ASBR2] mpls ldp

[ASBR2–mpls-ldp] quit

# Create remote LDP peers.

[ASBR2] mpls ldp remote-peer 2

[ASBR2-mpls-ldp-remote-2] remote-ip 2.2.2.2

[ASBR2-mpls-ldp-remote-2] quit

[ASBR2] mpls ldp remote-peer 3

[ASBR2-mpls-ldp-remote-3] remote-ip 4.4.4.4

[ASBR2-mpls-ldp-remote-3] quit

# Configure OSPF.

[ASBR2] ospf

[ASBR2-ospf-1] area 0

[ASBR2-ospf-1-area-0.0.0.0] network 3.3.3.3 0.0.0.0

[ASBR2-ospf-1-area-0.0.0.0] network 12.1.1.0 0.0.0.255

[ASBR2-ospf-1-area-0.0.0.0] quit

[ASBR2-ospf-1] quit

# Configure basic MPLS for GigabitEthernet 2/1/1, the interface connecting ASBR 1.

[ASBR2] interface gigabitethernet 2/1/1

[ASBR2-GigabitEthernet2/1/1] ip address 11.1.1.3 24

[ASBR2-GigabitEthernet2/1/1] mpls

[ASBR2-GigabitEthernet2/1/1] quit

# Configure basic MPLS for GigabitEthernet 2/1/2, the interface connecting PE 2.

[ASBR2] interface gigabitethernet 2/1/2

[ASBR2-GigabitEthernet2/1/2] ip address 12.1.1.3 24

[ASBR2-GigabitEthernet2/1/2] mpls

[ASBR2-GigabitEthernet2/1/2] mpls ldp

[ASBR2-GigabitEthernet2/1/2] quit

# Enable L2VPN and MPLS L2VPN.

[ASBR2] l2vpn

[ASBR2-l2vpn] mpls l2vpn

[ASBR2-l2vpn] quit

# Configure a P2P-capable VPLS instance aaa that uses LDP signaling.

[ASBR2] vsi aaa static p2p