R3303-HP HSR6800 Routers MPLS Configuration Guide

283
Ste
p
Command Remarks
3. Configure the remote PE as
the peer.
peer ip-address as-number
as-number
N/A
4. Specify the interface for TCP
connection.
peer ip-address connect-interface
interface-type interface-number
N/A
5. Enter BGP-VPNv4 subaddress
family view.
ipv4-family vpnv4 N/A
6. Set the default value of the
local preference.
default local-preference value
Optional.
100 by default.
7. Set the default value for the
system MED.
default med med-value
Optional.
By default, the default value of the
system MED is 0.
8. Filter all or certain types of
routes to be advertised.
filter-policy { acl-number |
ip-prefix ip-prefix-name } export
[ direct | isis process-id | ospf
process-id | rip process-id | static ]
Optional.
By default, BGP does not filter
routes to be advertised.
9. Filter received routes.
filter-policy { acl-number |
ip-prefix ip-prefix-name } import
Optional.
By default, BGP does not filter
received routes.
10. Advertise community
attributes to a peer or peer
group.
peer { group-name | ip-address }
advertise-community
Optional.
By default, no community attributes
are advertised to any peer or peer
group.
11. Filter routes received from or
to be advertised to a peer or
peer group based on an
AS_PATH list.
peer { group-name | ip-address }
as-path-acl aspath-filter-number
{ import | export }
Optional.
By default, no AS filtering list is
applied to a peer or peer group.
12. Advertise a default VPN route
to a peer or peer group.
peer { group-name | ip-address }
default-route-advertise
vpn-instance vpn-instance-name
Optional.
By default, no default VPN route is
advertised to a peer or peer group.
13. Apply a filtering policy to a
peer or peer group.
peer { group-name | ip-address }
filter-policy acl-number { export |
import }
Optional.
By default, no filtering policy is
applied to a peer or peer group.
14. Apply a route filtering policy
based on IP prefix list to a
peer or peer group.
peer { group-name | ip-address }
ip-prefix prefix-name { export |
import }
Optional.
By default, no route filtering policy
based on IP prefix list is applied to
a peer or peer group.
15. Specify not to change the next
hop of a route when
advertising it to an EBGP
peer.
peer { group-name | ip-address }
next-hop-invariable
Optional.
By default, a device uses its
address as the next hop when
advertising a route to its EBGP
peer.
16. Specify the preference value
for the routes received from
the peer/peer group.
peer { group-name | ip-address }
preferred-value value
Optional.
0 by default.