R3303-HP HSR6800 Routers MPLS Configuration Guide

315
172.2.1.0/24 OSPF 10 1 172.1.1.2 POS5/1/1
[PE1] display ospf peer verbose
OSPF Process 1 with Router ID 1.1.1.9
Neighbors
Area 0.0.0.0 interface 172.1.1.1(POS5/1/1)'s neighbors
Router ID: 2.2.2.9 Address: 172.1.1.2 GR State: Normal
State: Full Mode:Nbr is Master Priority: 1
DR: 172.1.1.1 BDR: 172.1.1.2 MTU: 0
Dead timer due in 38 sec
Neighbor is up for 00:02:44
Authentication Sequence: [ 0 ]
Neighbor state change count: 5
2. Configure basic MPLS and MPLS LDP on the MPLS backbone to establish LDP LSPs:
# Configure PE 1.
[PE1] mpls lsr-id 1.1.1.9
[PE1] mpls
[PE1-mpls] quit
[PE1] mpls ldp
[PE1-mpls-ldp] quit
[PE1] interface pos 5/1/1
[PE1-POS5/1/1] mpls
[PE1-POS5/1/1] mpls ldp
[PE1-POS5/1/1] quit
# Configure the P router.
[P] mpls lsr-id 2.2.2.9
[P] mpls
[P-mpls] quit
[P] mpls ldp
[P-mpls-ldp] quit
[P] interface pos 5/1/1
[P-POS5/1/1] mpls
[P-POS5/1/1] mpls ldp
[P-POS5/1/1] quit
[P] interface pos 5/1/2
[P-POS5/1/2] mpls
[P-POS5/1/2] mpls ldp
[P-POS5/1/2] quit
# Configure PE 2.
[PE2] mpls lsr-id 3.3.3.9
[PE2] mpls
[PE2-mpls] quit
[PE2] mpls ldp
[PE2-mpls-ldp] quit
[PE2] interface pos 5/1/1
[PE2-POS5/1/1] mpls
[PE2-POS5/1/1] mpls ldp
[PE2-POS5/1/1] quit