R3303-HP HSR6800 Routers MPLS Configuration Guide

32
Task Command Remarks
Display the label advertisement
information for the specified FEC.
display mpls ldp fec [ vpn-instance
vpn-instance-name ] dest-addr
mask-length [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about
LDP-enabled interfaces.
display mpls ldp interface [ all
[ verbose ] | [ vpn-instance
vpn-instance-name ]
[ interface-type interface-number |
verbose ] ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about LDP
peers.
display mpls ldp peer [ all
[ verbose ] | [ vpn-instance
vpn-instance-name ] [ peer-id |
verbose ] ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about remote
LDP peers.
display mpls ldp remote-peer
[ remote-name remote-peer-name ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about LDP
sessions between LDP peers.
display mpls ldp session [ all
[ verbose ] | [ vpn-instance
vpn-instance-name ] [ peer-id |
verbose ] ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display statistics information about
all LSP sessions.
display mpls ldp session all
statistics [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about LSPs
established by LDP.
display mpls ldp lsp [ all |
[ vpn-instance vpn-instance-name ]
[ dest-addr mask-length ] ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display information about CR-LSPs
established by CR-LDP.
display mpls ldp cr-lsp [ lspid lsr-id
lsp-id ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
NOTE:
The vpn-instance
vpn-instance-name option is used to specify information about an LDP instance. For
information about LDP instances, see "Configuring MPLS L3VPN."
Clearing MPLS statistics
Task Command Remarks
Clear MPLS statistics for one or all
MPLS interfaces.
reset mpls statistics interface
{ interface-type interface-number |
all }
Available in user view.