R3303-HP HSR6800 Routers MPLS Configuration Guide

420
A '*' before a Label means the USCB or DSCB is stale
3. Configure IPv6 VPN instances on the PEs to allow the CEs to access:
# Configure PE 1.
[PE1] ip vpn-instance vpn1
[PE1-vpn-instance-vpn1] route-distinguisher 100:1
[PE1-vpn-instance-vpn1] vpn-target 111:1
[PE1-vpn-instance-vpn1] quit
[PE1] ip vpn-instance vpn2
[PE1-vpn-instance-vpn2] route-distinguisher 100:2
[PE1-vpn-instance-vpn2] vpn-target 222:2
[PE1-vpn-instance-vpn2] quit
[PE1] interface gigabitethernet 2/1/1
[PE1-GigabitEthernet2/1/1] ip binding vpn-instance vpn1
[PE1-GigabitEthernet2/1/1] ipv6 address 2001:1::2 96
[PE1-GigabitEthernet2/1/1] quit
[PE1] interface gigabitethernet 2/1/2
[PE1-GigabitEthernet2/1/2] ip binding vpn-instance vpn2
[PE1-GigabitEthernet2/1/2] ipv6 address 2001:2::2 96
[PE1-GigabitEthernet2/1/2] quit
# Configure PE 2.
[PE2] ip vpn-instance vpn1
[PE2-vpn-instance-vpn1] route-distinguisher 200:1
[PE2-vpn-instance-vpn1] vpn-target 111:1
[PE2-vpn-instance-vpn1] quit
[PE2] ip vpn-instance vpn2
[PE2-vpn-instance-vpn2] route-distinguisher 200:2
[PE2-vpn-instance-vpn2] vpn-target 222:2
[PE2-vpn-instance-vpn2] quit
[PE2] interface gigabitethernet 2/1/1
[PE2-GigabitEthernet2/1/1] ip binding vpn-instance vpn1
[PE2-GigabitEthernet2/1/1] ipv6 address 2001:3::2 96
[PE2-GigabitEthernet2/1/1] quit
[PE2] interface gigabitethernet 2/1/2
[PE2-GigabitEthernet2/1/2] ip binding vpn-instance vpn2
[PE2-GigabitEthernet2/1/2] ipv6 address 2001:4::2 24
[PE2-GigabitEthernet2/1/2] quit
# Configure IP addresses for the CEs according to Figure 105. (Details not shown.)
After completing the configurations, execute the display ip vpn-instance command on the PEs to
view information about the VPN instances. Use the ping command to test connectivity between the
PEs and their attached CEs. The PEs can ping their attached CEs. Take PE 1 as an example:
[PE1] display ip vpn-instance
Total VPN-Instances configured : 2
VPN-Instance Name RD Create Time
vpn1 100:1 2006/08/13 09:32:45
vpn2 100:2 2006/08/13 09:42:59
[PE1] ping ipv6 -vpn-instance vpn1 2001:1::1
PING 2001:1::1 : 56 data bytes, press CTRL_C to break