R3303-HP HSR6800 Routers MPLS Configuration Guide

428
Reply from 2001:2::1
bytes=56 Sequence=2 hop limit=64 time = 1 ms
Reply from 2001:2::1
bytes=56 Sequence=3 hop limit=64 time = 1 ms
Reply from 2001:2::1
bytes=56 Sequence=4 hop limit=64 time = 1 ms
Reply from 2001:2::1
bytes=56 Sequence=5 hop limit=64 time = 1 ms
--- 2001:2::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/1 ms
Configuring inter-AS IPv6 VPN option A
Network requirements
CE 1 and CE 2 belong to the same VPN. CE 1 accesses the network through PE 1 in AS 100 and CE 2
accesses the network through PE 2 in AS 200.
An inter-AS IPv6 MPLS L3VPN is implemented using option A, where the VRF-to-VRF method is used to
manage VPN routes.
The MPLS backbone in each AS runs OSPF.
Figure 107 Network diagram
Device Interface IP address Device Interface IP address
CE 1 GE2/1
/
1 2001:1::1/96 CE 2 GE2/1
/
1 2001:2::1/96
PE 1 Loop0 1.1.1.9/32 PE 2 Loop0 4.4.4.9/32
GE2/1
/
1 2001:1::2/96 GE2/1
/
1 2001:2::2/96
POS5/1/1 172.1.1.2/24 POS5/1/1 162.1.1.2/24