R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

97
Default
IPC performance statistics is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
node node-id: Displays channel information for the node specified by the node-id argument. In
standalone mode, the value range for the node-id argument is 0 to 13 for HSR6802, 0 to 15 for
HSR6804, and 0 to 19 for HSR6808. In IRF mode, the value range for the node-id argument is 0 to 39.
self-node: Enables IPC performance statistics for the local node.
channel channel-id: Enables IPC performance statistics for the channel specified by the channel-id
argument.
Usage guidelines
When IPC performance statistics is disabled, the statistics data does not change. The display ipc
performance command displays the statistics collected before IPC performance statistics was disabled.
Examples
# Enable IPC performance statistics for channel 18 on node 6.
<Sysname> ipc performance enable node 6 channel 18
reset ipc performance
Use reset ipc performance to clear IPC performance statistics.
Syntax
reset ipc performance [ node node-id | self-node ] [ channel channel-id ]
Views
User view
Default command level
1: Monitor level
Parameters
node node-id: Displays channel information for the node specified by the node-id argument. In
standalone mode, the value range for the node-id argument is 0 to 13 for HSR6802, 0 to 15 for
HSR6804, and 0 to 19 for HSR6808. In IRF mode, the value range for the node-id argument is 0 to 39.
self-node: Clears the IPC performance statistics for the local node.
channel channel-id: Clears the IPC performance statistics for the channel specified by the channel-id
argument.
Usage guidelines
After this command is executed, the corresponding statistics will be cleared.