R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

133
Table 29 Command output
Field Description
AlarmEntry entry-number owned by owner is
status
Status of the alarm entry entry-number created by the owner is
status.
• entry-number—Alarm entry, corresponding to the MIB
node alarmIndex.
• owner—Entry owner, corresponding to the MIB node
alarmOwner.
• status—Entry status, corresponding to the MIB node
alarmStatus.
{ VALID—The entry is valid.
{ UNDERCREATION—The entry is invalid.
The display rmon command can display invalid entries, but
the display current-configuration and display this commands
do not display their settings.
Samples type
Sampling type (the value can be absolute or delta),
corresponding to the MIB node alarmSampleType.
Variable formula
Alarm variable, namely, the monitored MIB node,
corresponding to the MIB node alarmVariable.
Sampling interval
Sampling interval, in seconds, corresponding to the MIB node
alarmInterval.
Rising threshold
Alarm rising threshold, corresponding to the MIB node
alarmRisingThreshold.
When the sampling value is greater than or equal to this
threshold, a rising alarm is triggered.
Falling threshold
Alarm falling threshold, corresponding to the MIB node
alarmFallingThreshold.
When the sampling value is smaller than or equal to this
threshold, a falling alarm is triggered.
When startup enables
How an alarm can be triggered, corresponding to the MIB
node alarmStartupAlarm.
Latest value
Last sampled value, corresponding to the MIB node
alarmValue.
Related commands
rmon alarm
display rmon event
Use display rmon event to display the configuration of the specified or all RMON event entries.
Syntax
display rmon event [ entry-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view