R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

7
Reply from 2001::1
bytes=56 Sequence=1 hop limit=64 time = 62 ms
Reply from 2001::1
bytes=56 Sequence=2 hop limit=64 time = 26 ms
Reply from 2001::1
bytes=56 Sequence=3 hop limit=64 time = 20 ms
Reply from 2001::1
bytes=56 Sequence=4 hop limit=64 time = 4 ms
Reply from 2001::1
bytes=56 Sequence=5 hop limit=64 time = 16 ms
--- 2001::2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 4/25/62 ms
# Verify whether the IPv6 address 2001::1 in VPN 1 is reachable.
<Sysname> ping ipv6 –vpn-instance vpn1 2001::1
PING 2001::1 : 56 data bytes, press CTRL_C to break
Reply from 2001::1
bytes=56 Sequence=1 hop limit=64 time = 62 ms
Reply from 2001::1
bytes=56 Sequence=2 hop limit=64 time = 26 ms
Reply from 2001::1
bytes=56 Sequence=3 hop limit=64 time = 20 ms
Reply from 2001::1
bytes=56 Sequence=4 hop limit=64 time = 4 ms
Reply from 2001::1
bytes=56 Sequence=5 hop limit=64 time = 16 ms
--- 2001::2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 4/25/62 ms
The "hop limit" field in this prompt information has the same meaning as the "ttl" field in the prompt
information displayed by the IPv4 ping command, indicating the TTL value in the ICMPv6 echo request.
For the description on other fields, see Table 1.
tracert
Use tracert to trace the path the packets traverse from source to destination.
Syntax
tracert [ -a source-ip | -f first-ttl | -m max-ttl | -p port | -q packet-number | { -mt topology-name |
-vpn-instance vpn-instance-name } | -w timeout ] * host