R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

154
GigabitEthernet2/0/2 both
mirroring-group 6:
type: remote-source
status: inactive
mirroring port:
GigabitEthernet2/0/4 both
mirroring VLAN:
mirroring CPU:
monitor egress port:
remote-probe vlan: 1900
mirroring-group 9:
type: remote-destination
status: active
monitor port: GigabitEthernet2/0/6
remote-probe vlan: 1901
Table 36 Command output
Field Descri
p
tion
mirroring-group Number of the mirroring group.
type Type of the mirroring group, local, remote-source, or remote-destination.
status Status of the mirroring group, active or inactive.
mirroring port Source port.
mirroring-group
Use mirroring-group to create a mirroring group.
Use undo mirroring-group to remove the specified mirroring group or groups.
Syntax
mirroring-group group-id { local | remote-destination | remote-source }
undo mirroring-group { group-id | all | local | remote-destination | remote-source }
Default
No mirroring group exists on a device.
Views
System view
Default command level
2: System level
Parameters
group-id: Specifies the number of the mirroring group, in the range of 1 to 4.
all: Removes all mirroring groups by using the undo command.
local: Creates a local mirroring group or removes all local mirroring groups with the undo command.