R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

165
DstMask: 32 SrcMask: 24 Nexthop: 127.0.0.1
DstAS: 0 SrcAS: 0 BgpNexthop: 0.0.0.0
OutVRF: 0 InVRF: 0
SamplerMode: 0 SamplerInt: 0
Active: 108 Bytes/Pkt: 55
First packet arrived: 01/01/2000, 00:01:10
Last packet arrived: 01/01/2000, 00:01:20
Table 37 Command output
Field Descri
p
tion
IP netstream cache information Information about NetStream entries in the cache.
Stream active timeout (in seconds) Active aging timer in seconds for NetStream entries.
Stream inactive timeout(in seconds) Inactive aging timer in seconds for NetStream entries.
Stream max entry number Maximum number of flow entries allowed in the cache.
IP Active stream entry number Number of active IP flows in the cache.
MPLS Active stream entry number Number of active MPLS flows in the cache.
IP Stream entries been counted Number of IP flows that are counted.
MPLS Stream entries been counted Number of MPLS flows that are counted.
Last statistics reset time
This field is an absolute time and will not change with the system time.
It is displayed only when the reset ip netstream statistics command is
executed. Otherwise, the value for this field is Never.
IP packet size distribution (63 total
packets):
Distribution of IP packets by packet size, and the bracketed number is
the total number of IP packets.
The value is displayed in the proportion of number of IP packets to the
total IP packets, and is displayed with 3 decimal places.
1-32 64 96 128 160 192 224
256 288
320 352 384 416 448 480 512
544 576
1024 1536 2048 2560 3072 3584
4096 4608
Range of IP packet length (excluding data link layer header) in bytes.
Ranging from 1 to 576, the range increments in the step of 32. For
example, 1-32 shows the number of packets in size of 1 to 32 bytes,
and 64 shows the number of packets in size of 33 to 64 bytes. For the
value greater than 1024, the range increments in the step of 512. For
example, 1536 shows the number of packets in size of 1025 to 1536
bytes. Packets in size of 577 to 1024 are recorded in the 1024 entry.
Protocol Total Streams
Packets/Sec Stream/Sec
Packets/stream Active(sec) /stream
Idle(sec)/stream
Statistics of packet by protocol type in the following counting criteria:
protocol type, total number of flows, number of packets per second,
number of flows per second, number of packets per flow, active time
of each flow, inactive time of each flow.
Type DstIP(Port) SrcIP(Port)
Pro ToS If(Direct) Pkts
Statistics of the active flows in the current cache including flow type,
destination IP address (destination port), source IP address (source
port), protocol number, ToS, interface type and name (direction), and
the number of packets.
Flows are classified into the following types: IP flows, L2 flows, IP&L2
flows, MPLS flows with no IP options, and MPLS flows with IP options.
ICMP packets do not contain port number fields, so the type and code
fields are captured. The value for the destination port represents these
two fields. More specifically, the highest 8 bits represent the type field,
and the lowest 8 bits represent the code field. The value for the source
port is set to 0 and does not indicate any statistics.