R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

171
Default
No NetStream aggregation is enabled.
Views
NetStream aggregation view
Default command level
3: Manage level
Examples
# Enable NetStream AS aggregation.
<Sysname> system-view
[Sysname] ip netstream aggregation as
[Sysname-ns-aggregation-as] enable
Related commands
ip netstream aggregation
ip netstream
Use ip netstream to enable NetStream on the specified interface.
Use undo ip netstream to disable NetStream on the specified interface.
Syntax
ip netstream { inbound | outbound }
undo ip netstream { inbound | outbound }
Default
NetStream is disabled on an interface.
Views
Interface view
Default command level
3: Manage level
Parameters
inbound: Enables NetStream for incoming traffic.
outbound: Enables NetStream for outgoing traffic.
Examples
# Enable NetStream for incoming traffic on interface GigabitEthernet 2/0/0.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/0
[Sysname-GigabitEthernet2/0/0] ip netstream inbound
ip netstream aging
Use ip netstream aging to enable periodical aging and TCP FIN- and RST-triggered aging.