R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

172
Use undo ip netstream aging to disable periodical aging and TCP FIN- and RST-triggered aging.
Syntax
ip netstream aging
undo ip netstream aging
Default
Periodical aging and TCP FIN- and RST-triggered aging are enabled.
Views
System view
Default command level
3: Manage level
Parameters
None
Examples
# Disable periodical aging and TCP FIN- and RST-triggered aging for NetStream entries in the cache.
<Sysname> system-view
[Sysname] undo ip netstream aging
ip netstream aggregation
Use ip netstream aggregation to set a NetStream aggregation mode and to enter the NetStream
aggregation view.
Syntax
ip netstream aggregation { as | destination-prefix | prefix | prefix-port | protocol-port | source-prefix
| tos-as | tos-bgp-nexthop | tos-destination-prefix | tos-prefix | tos-protocol-port | tos-source-prefix }
Views
System view
Default command level
3: Manage level
Parameters
as: Specifies the AS aggregation by source AS number, destination AS number, inbound interface index,
and outbound interface index.
destination-prefix: Specifies the destination-prefix aggregation by destination AS number, destination
address mask length, destination prefix, and outbound interface index.
prefix: Specifies the source and destination prefix aggregation by source AS number, destination AS
number, source address mask length, destination address mask length, source prefix, destination prefix,
inbound interface index, and outbound interface index.
prefix-port: Specifies the prefix-port aggregation by source prefix, destination prefix, source address
mask length, destination address mask length, ToS, protocol number, source port, destination port,
inbound interface index, and outbound interface index.