R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

173
protocol-port: Specifies the protocol-port aggregation by protocol number, source port, and destination
port.
source-prefix: Specifies the source-prefix aggregation by source AS number, source address mask length,
source prefix, and inbound interface index.
tos-as: Specifies the ToS-AS aggregation by ToS, source AS number, destination AS number, inbound
interface index, and outbound interface index.
tos-bgp-nexthop: Specifies the ToS-BGP nexthop aggregation by ToS, BGP next hop address, and
outbound interface index. ToS-BGP next hop aggregation is supported by a version 9 template.
tos-destination-prefix: Specifies the ToS-destination-prefix aggregation by ToS, destination AS number,
destination address mask length, destination prefix, and outbound interface index.
tos-prefix: Specifies the ToS-prefix aggregation by ToS, source AS number, source prefix, source address
mask length, destination AS number, destination address mask length, destination prefix, inbound
interface index, and outbound interface index.
tos-protocol-port: Specifies the ToS-protocol-port aggregation by ToS, protocol number, source port,
destination port, inbound interface index, and outbound interface index.
tos-source-prefix: Specifies the ToS-source-prefix aggregation by ToS, source AS number, source prefix,
source address mask length, and inbound interface index.
Usage guidelines
In NetStream aggregation view, you can perform the following tasks:
• Enable or disable the specified NetStream aggregation.
• Configure source interface, destination IP address, and destination port for export of NetStream
data.
Examples
# Set the NetStream aggregation mode as AS, and enter the NetStream AS aggregation view.
<Sysname> system-view
[Sysname] ip netstream aggregation as
[Sysname-ns-aggregation-as]
Related commands
• enable
• ip netstream export host
• ip netstream export source
ip netstream export host
Use ip netstream export host to set the destination address and destination UDP port number for
NetStream data export.
Use undo ip netstream export host to delete the specified or all export addresses that are configured in
the specified view.
Syntax
ip netstream export host ip-address udp-port [ vpn-instance vpn-instance-name ]
undo ip netstream export host [ ip-address [ vpn-instance vpn-instance-name ] ]