R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

175
Syntax
ip netstream export rate rate
undo ip netstream export rate
Default
The export rate of NetStream data is not limited.
Views
System view
Default command level
3: Manage level
Parameters
rate: Specifies the maximum rate for exporting NetStream data, in the unit of the maximum number of
packets per second. The value is in the range of 1 to 1000.
Examples
# Allow 10 packets at most to be exported per second.
<Sysname> system-view
[Sysname] ip netstream export rate 10
ip netstream export source
Use ip netstream export source to configure the source interface for NetStream data export.
Use undo ip netstream export source to remove the configuration.
Syntax
ip netstream export source interface interface-type interface-number
undo ip netstream export source
Default
The interface where the NetStream data is sent out (the interface connects to the NetStream server) is
used as the source interface.
Views
System view, NetStream aggregation view
Default command level
3: Manage level
Parameters
interface-type interface-number: Specifies a source interface by its type and number for NetStream data
export.
Usage guidelines
Different source interfaces can be configured in different aggregation views.
If no source interface is configured in aggregation view, the source interface configured in system view
is used.