R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

177

Related commands

ip netstream export v9-template refresh-rate time

Use ip netstream export v9-template refresh-rate time to configure the refresh interval for NetStream

version 9 templates so that the templates are sent after the specified time period.

Use undo ip netstream export version to restore the default.

Syntax

ip netstream export v9-template refresh-rate time minutes

undo ip netstream export v9-template refresh-rate time

Default

Version 9 templates are resent every 30 minutes.

Views

System view

Default command level

3: Manage level

Parameters

minutes: Specifies the refresh interval in minutes that the device waits after NetStream version 9 templates

are sent to the NetStream server. The value is in the range of 1 to 3600.

Usage guidelines

Version 9 is template-based and supports user-defined formats, so the NetStream-enabled device needs

to send the new template to the NetStream server for an update. If the version 9 format is changed on the

NetStream-enabled device and not updated on the NetStream server, the server is unable to associate

the received statistics with its proper fields. To avoid such situation, configure the refresh interval for

version 9 templates so that the NetStream server can refresh them on time.

The refresh frequency and interval can be both configured, and the template is resent when either of the

condition is reached.

Examples

# Configure the device to wait for 60 minutes before sending NetStream version 9 templates again to the

NetStream server.

<Sysname> system-view

[Sysname] ip netstream export v9-template refresh-rate time 60

Related commands

ip netstream export v9-template refresh-rate packet

ip netstream export version

Use ip netstream export version 5 to export NetStream data in version 5 format, and choose whether to

record data about AS information.