R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

181
[Sysname-GigabitEthernet2/0/0] ip netstream sampler abc inbound
ip netstream timeout active
Use ip netstream timeout active to set the aging timer for active flows. This timer applies to NetStream
traditional data flows.
Use undo ip netstream timeout active to restore the default.
Syntax
ip netstream timeout active seconds
undo ip netstream timeout active
Default
The aging timer is 1800 seconds for active flows.
Views
System view
Default command level
3: Manage level
Parameters
seconds: Sets the aging timer for active flows, in the range of 10 to 3600 seconds.
Usage guidelines
You can configure both the aging timer for active flows and the aging timer for inactive flows. When
either timer for a flow expires, the flow is aged out. The time precision is 10 seconds.
Examples
# Set the aging timer to 60 seconds for active flows.
<Sysname> system-view
[Sysname] ip netstream timeout active 60
Related commands
ip netstream timeout inactive
ip netstream timeout inactive
Use ip netstream timeout inactive to set the aging timer for inactive flows. This timer applies to NetStream
traditional data flows.
Use undo ip netstream timeout inactive to restore the default.
Syntax
ip netstream timeout inactive seconds
undo ip netstream timeout inactive
Default
The aging timer is 30 seconds for inactive flows.