R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

182
Views
System view
Default command level
3: Manage level
Parameters
seconds: Sets the aging timer for inactive flows, in the range of 10 to 600 seconds.
Usage guidelines
You can configure both the aging timer for active flows and the aging timer for inactive flows. When
either timer for a flow expires, the flow is aged out. The time precision is 10 seconds.
Examples
# Set the aging timer to 60 seconds for inactive flows.
<Sysname> system-view
[Sysname] ip netstream timeout inactive 60
Related commands
ip netstream timeout active
reset ip netstream statistics
Use reset ip netstream statistics to age out and export NetStream data, and clear the cache.
Syntax
reset ip netstream statistics
Views
User view
Default command level
2: System level
Usage guidelines
When you execute the command, messages appear telling you that the process of clearing the cache
takes several minutes and the system does not perform NetStream data collection during this process.
Examples
# Age out and export all NetStream data and clear the cache.
<Sysname> reset ip netstream statistics
This process may take a few minutes.
Netstream statistic function is disabled during this process.