R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

190
L4 destination port 2
IP protocol version 1
TCP flags 1
Protocol 1
Source ToS 1
IPv6 source mask 1
IPv6 destination mask 1
Direction 1
Forwarding offset 1
Out VPN ID 2
Sampling algorithm 1
PAD 1
Sampling interval 4
Table 42 Command output
Field Descri
p
tion
Stream template refresh-rate packet Refresh frequency with which the template is sent.
Stream template refresh-rate time(in minute) Refresh interval in minutes at which the template is sent.
Active stream templates Number of active stream templates at present.
Added stream templates
Number of templates that have been created after the system
starts.
AS outbound template Information about the AS template in the outbound direction.
AS inbound template Information about the AS template in the inbound direction.
Packets
Number of packets sent using the template. A packet may
contain multiple flows and different flows may use different
templates. The number of packets is in fact the number of flows.
Last template export time Last time when the template was exported.
Field count Total number of fields in a template.
enable
Use enable to enable current IPv6 NetStream aggregation.
Use undo enable to disable current IPv6 NetStream aggregation.
Syntax
enable
undo enable
Default
No IPv6 NetStream aggregation is enabled.
Views
NetStream aggregation view
Default command level
3: Manage level