R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

197
ipv6 netstream export version 9
Use ipv6 netstream export version 9 to export IPv6 NetStream data in version 9 format, and choose
whether to record data about AS and BGP next hop information.
Use undo ipv6 netstream export version to restore the default.
Syntax
ipv6 netstream export version 9 [ origin-as | peer-as ] [ bgp-nexthop ]
undo ipv6 netstream export version
Default
Version 9 format is used to export IPv6 NetStream traditional data, IPv6 NetStream aggregation data,
and MPLS flow data with IPv6 fields. The peer AS numbers are recorded. The BGP next hop is not
recorded.
Views
System view
Default command level
3: Manage level
Parameters
origin-as: Exports the statistics about source AS and destination AS.
peer-as: Exports the statistics about the peer ASs.
bgp-nexthop: Exports statistics about BGP next hops.
Usage guidelines
An IPv6 NetStream entry for a flow records the source IPv6 address and destination IPv6 address, and
two AS numbers for each IP address. You can configure which AS numbers to be exported as the source
AS and destination AS.
Examples
# Configure the device to export IPv6 NetStream data in version 9 format and record the number of AS
that originates the BGP route.
<Sysname> system-view
[Sysname] ipv6 netstream export version 9 origin-as
ipv6 netstream timeout active
Use ipv6 netstream timeout active to set the aging timer for active flows. This timer applies to only
NetStream traditional data flows.
Use undo ipv6 netstream timeout active to restore the default.
Syntax
ipv6 netstream timeout active seconds
undo ipv6 netstream timeout active
Default
The aging timer is 1800 seconds for active flows.