R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

209
Table 49 Command output
Field Descri
p
tion
Trapping buffer configuration and contents State of the trap buffer, enabled or disabled.
Allowed max buffer size Maximum capacity of the trap buffer.
Actual buffer size Actual capacity of the trap buffer.
Channel number Channel number of the trap buffer, which defaults to 3.
channel name
Channel name of the trap buffer, which defaults to
trapbuffer.
Dropped messages Number of dropped messages.
Overwritten messages
Number of overwritten messages (when the buffer size is
not big enough to hold all messages, the latest messages
overwrite the old ones).
Current messages Number of current messages.
enable log updown
Use enable log updown to allow a port to generate link up/down logs when the port state changes.
Use undo enable log updown to disable a port from generating link up/down logs when the port state
changes.
Syntax
enable log updown
undo enable log updown
Default
All the ports are allowed to generate port link up/down logs when the port state changes.
Views
Interface view
Default command level
2: System level
Examples
# Disable port GigabitEthernet2/0/1 from generating link up/down logs.
<Sysname> system-view
[Sysname] interface gigabitethernet2/0/1
[Sysname-GigabitEthernet2/0/1] undo enable log updown
info-center channel name
Use info-center channel name to name a channel.
Use undo info-center channel to command to restore the default name for a channel.