R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

214

Use undo info-center logfile overwrite-protection to disable log file overwrite-protection. When the size

of the log file reaches the upper limit or the storage device runs out of memory, the device deletes the old

logs in the log file and writes new logs into the log file.

Syntax

info-center logfile overwrite-protection [ all-port-powerdown ]

undo info-center logfile overwrite-protection

Default

Log file overwrite-protection is disabled.

Views

System view

Default command level

2: System level

Parameters

all-port-powerdown: Shuts down all the service interfaces on the device when the size of the log file

reaches the upper limit or the storage device runs out of memory.

Usage guidelines

This command is supported only in FIPS mode.

Examples

# Enable log file overwrite-protection.

<Sysname> system-view

[Sysname] info-center logfile overwrite-protection

info-center logfile size-quota

Use info-center logfile size-quota to set the maximum storage space reserved for a log file.

Use undo info-center logfile size-quota to restore the default maximum storage space reserved for a log

file.

Syntax

info-center logfile size-quota size

undo info-center logfile size-quota