R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

241
Field Descri
p
tion
Status
Status of the sFlow-enabled port:
• Suspend—Port is down.
• Active—Port is up.
sflow agent
Use sflow agent to configure an IP address for the sFlow agent.
Use undo sflow agent to remove the configured IP address.
Syntax
sflow agent { ip ip-address | ipv6 ipv6-address }
undo sflow agent { ip | ipv6 }
Default
No IP address is configured for the sFlow agent. The device periodically checks whether the sFlow agent
has an IP address. If the sFlow agent has no IP address configured, the device automatically selects an
IP address for the sFlow agent but does not save the IP address in the configuration file.
Views
System view
Default command level
2: System level
Parameters
ip ip-address: Specifies an IPv4 address for the sFlow agent.
ipv6 ipv6-address: Specifies an IPv6 address for the sFlow agent.
Usage guidelines
HP recommends manually configuring an IP address for the sFlow agent.
Only one IP address can be specified for the sFlow agent on the device.
Examples
# Specify IP address 10.10.10.1 for the sFlow agent.
<Sysname> system-view
[Sysname] sflow agent ip 10.10.10.1
sflow collector
Use sflow collector to configure parameters for an sFlow collector.
Use undo sflow collector to remove an sFlow collector.
Syntax
sflow collector collector-id { { ip ip-address | ipv6 ipv6-address } | datagram-size size | description text
| port port-number | time-out seconds } *
undo sflow collector collector-id