R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

252
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The output fields of the command depend on the device model.
Examples
# (In standalone mode.) Display brief information about all legitimate flow entries in the host-monitor
table.
<Sysname> display host-monitor
Total 1 flow(s) on slot 1.
State: Fixed
Source Destination Protocol Direction Interface VPN
-------------------------------------------------------------------
2.2.2.2 3.3.3.3 6 Inbound Eth1/1 vpn1
Total 1 flow(s) on slot 2.
State: Unfixed
Source Destination Protocol Direction Interface VPN
-------------------------------------------------------------------
2.2.2.2 4.3.3.4 6 Inbound Eth2/1 vpn1
# (In IRF mode.) Display brief information about all Host-monitor flow entries.
<Sysname> display host-monitor
Total 1 flow(s) on chassis 1 slot 2.
State: Fixed
Source Destination Protocol Direction Interface VPN
-------------------------------------------------------------------
2.2.2.2 3.3.3.3 6 Inbound Eth1/1 vpn1
Table 54 Command output
Field Description
State
State of flow entries:
• Fixed—The table has been fixed.
• Unfixed—The table has not been fixed.
Source Source IP address of the traffic flow.
Destination Destination IP address of the traffic flow.
Protocol Protocol number of the traffic flow.
Direction
Traffic flow direction:
• Inbound—Incoming traffic.
• Outbound—Outgoing traffic.
Interface Interface where the traffic flow is monitored.
VPN
VPN that the traffic flow belongs to. If the traffic flow does not
belong to any VPN, this field displays nothing.
# (In standalone mode.) Display detailed information about all Host-monitor flow entries.
<Sysname> display host-monitor verbose
Total 1 flow(s) on slot 1.