R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

254
Field Description
Source Source IP address of the traffic flows.
Destination Destination IP address of the traffic flows.
Protocol Protocol number of the traffic flows.
Direction
Traffic flow direction:
• Inbound—Incoming traffic.
• Outbound—Outgoing traffic.
Interface Interface where the traffic flow is monitored.
VPN-instance
VPN that the traffic flow belongs to. If the traffic flow does not
belong to any VPN, this field displays nothing.
Packets Number of packets in the traffic flow.
Bytes Number of bytes in the traffic flow.
First packet arrived Time when the first packet in the traffic flow arrived.
Last packet arrived Time when the last packet in the traffic flow arrived.
host-monitor
Use host-monitor to enable Host-monitor globally.
Use undo host-monitor to restore the default.
Syntax
host-monitor { inbound | outbound }
undo host-monitor { inbound | outbound }
Default
Host-monitor is disabled.
Views
System view
Default command level
3: Manage level
Parameters
inbound: Enables Host-monitor for incoming traffic.
outbound: Enables Host-monitor for outgoing traffic.
Usage guidelines
The command takes effect on all interfaces.
Examples
# Enable Host-monitor globally for incoming traffic.
<Sysname> system-view
[Sysname] host-monitor inbound