R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

257
host-monitor fixup
Use host-monitor fixup to set the Host-monitor table to Fixed state.
Use undo host-monitor fixup to set the Host-monitor table to Unfixed state, and remove all illegitimate
entries.
Syntax
In standalone mode:
host-monitor fixup [ slot slot-number ]
undo host-monitor fixup [ slot slot-number ]
In IRF mode:
host-monitor fixup [ chassis chassis-number slot slot-number ]
undo host-monitor fixup [ chassis chassis-number slot slot-number ]
Views
System view
Default command level
3: Manage level
Parameters
slot slot-number: Freezes legitimate flow entries on a card. The slot-number argument specifies a card by
its slot number. If no slot is specified, freeze legitimate flow entries on each card. (In standalone mode.)
chassis chassis-number slot slot-number: Freezes legitimate flow entries on a card of an IRF member
device. The chassis-number argument represents the ID of the IRF member device and the slot-number
argument represents the number of the slot where the card resides. If no slot is specified, freeze legitimate
flow entries on each card in the IRF fabric. (In IRF mode.)
Examples
# Freeze the current flow entries to Fixed state.
<Sysname> system-view
[Sysname] host-monitor fixup
Related commands
reset host-monitor
reset host-monitor entry
Use reset host-monitor entry to delete unfixed legitimate flow entries or illegitimate flow entries.
Syntax
In standalone mode:
reset host-monitor entry [ invalid ] [ slot slot-number [ source-slot source-slot-number ] ]
In IRF mode:
reset host-monitor entry [ invalid ] [ chassis chassis-number slot slot-number [ source-slot
source-slot-number ] ]