R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

37
Default
The NQA client is enabled.
Views
System view
Default command level
2: System level
Examples
# Enable the NQA client.
<Sysname> system-view
[Sysname] nqa agent enable
Related commands
nqa server enable
nqa agent max-concurrent
Use nqa agent max-concurrent to configure the maximum number of operations that the NQA client can
simultaneously perform.
Use undo nqa agent max-concurrent to restore the default.
Syntax
nqa agent max-concurrent number
undo nqa agent max-concurrent
Default
The NQA client can simultaneously perform a maximum of 40 operations.
Views
System view
Default command level
2: System level
Parameters
number: Specifies the maximum number of operations that the NQA client can simultaneously perform.
The value range is 1 to 500.
Examples
# Configure the maximum number of operations that the NQA client can simultaneously perform as 5.
<Sysname> system-view
[Sysname] nqa agent max-concurrent 5
nqa schedule
Use nqa schedule to configure the scheduling parameters for an NQA operation.
Use undo nqa schedule to stop the operation.