R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

41
Default command level
2: System level
Parameters
cipher: Sets a ciphertext password.
simple: Sets a plaintext password.
password: Specifies the password used to log in to the FTP server. This argument is case sensitive. If
simple is specified, it must be a plaintext string of 1 to 32 characters. If cipher is specified, it must be a
ciphertext string of 1 to 73 characters. If neither cipher nor simple is specified, you set a plaintext
password.
Usage guidelines
For security purposes, all keys, including keys configured in plain text, are saved in cipher text.
Examples
# Configure the password used for logging in to the FTP server as ftpuser.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] password simple ftpuser
Related commands
• username
• operation
probe count
Use probe count to specify the probe times.
Use undo probe count to restore the default.
Syntax
probe count times
undo probe count
Default
An operation performs one probe.
Views
DHCP operation view, DNS operation view, DLSw operation view, FTP operation view, HTTP operation
view, ICMP echo operation view, SNMP operation view, TCP operation view, UDP echo operation view,
UDP jitter operation view
Default command level
2: System level
Parameters
times: Specifies the probe times in the range of 1 to 15.
Usage guidelines
The following describes how different NQA operation types operate: