R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

55
action-type: Specifies what action to be triggered.
trigger-only: Triggers collaboration with other modules.
Usage guidelines
You cannot edit a reaction entry. To change the attributes in a reaction entry, use undo reaction to delete
the entry first and then configure a new one.
The collaboration function is not supported by the UDP jitter or voice operation.
Examples
# Create reaction entry 1. If the number of consecutive probe failures reaches 3, collaboration is
triggered.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type tcp
[Sysname-nqa-admin-test-tcp] reaction 1 checked-element probe-fail threshold-type
consecutive 3 action-type trigger-only
Related commands
track (High Availability Command Reference)
reaction checked-element rtt
Use reaction checked-element rtt to configure a reaction entry for monitoring packet round-trip time. You
cannot edit a reaction entry. To change the attributes in a reaction entry, use undo reaction to delete the
entry first and then configure a new one.
Use undo reaction to delete the specified reaction entry.
Syntax
reaction item-number checked-element rtt threshold-type { accumulate accumulate-occurrences |
average } threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]
undo reaction item-number
Default
No reaction entry for monitoring packet round-trip time is configured.
Views
UDP jitter operation view, voice operation view
Default command level
2: System level
Parameters
item-number: Specifies a reaction entry ID in the range of 1 to 10.
threshold-type: Specifies a threshold type.
accumulate accumulate-occurrences: Specifies the total number of threshold violations. The value is in the
range of 1 to 15000 for UDP jitter operation and 1 to 60000 for voice operation.
average: Specifies to check the packet average round-trip time.
threshold-value: Specifies threshold values in milliseconds.