R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

63
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics interval 2
tos
Use tos to specify the ToS value in the IP packet header of probe packets.
Use undo tos to restore the default.
Syntax
tos value
undo tos
Default
The ToS value in the IP packet header of probe packets is 0.
Views
DLSw operation view, DNS operation view, FTP operation view, HTTP operation view, ICMP echo
operation view, SNMP operation view, TCP operation view, UDP echo operation view, UDP jitter
operation view, voice operation view
Default command level
2: System level
Parameters
value: Specifies the ToS value in the IP packet header of probe packets, in the range of 0 to 255.
Examples
# Configure the ToS value in an IP packet header of probe packets as 1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] tos 1
ttl
Use ttl to specify the TTL for probe packets.
Use undo ttl to restore the default.
Syntax
ttl value
undo ttl
Default
The TTL for probe packets is 20.