R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

66
Views
FTP operation view
Default command level
2: System level
Parameters
username: Specifies the username used to log in to the FTP server. The username is a case-sensitive string
of 1 to 32 characters.
Examples
# Configure the login username as administrator.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] username administrator
Related commands
• password
• operation
vpn-instance (ICMP echo operation view)
Use vpn-instance to apply the ICMP echo operation to the specified VPN.
Use undo vpn-instance to restore the default.
Syntax
vpn-instance vpn-instance-name
undo vpn-instance
Default
The ICMP echo operation applies to the public network.
Views
ICMP echo operation view
Default command level
2: System level
Parameters
vpn-instance-name: Specifies the name of the MPLS L3VPN, a case-sensitive string of 1 to 31 characters.
Examples
# Specify vpn1 as the MPLS L3VPN.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] vpn-instance vpn1