R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

67
NQA server configuration commands
NOTE:
You only need to configure the NQA server for UDP jitter, TCP, UDP echo, and voice operations.
display nqa server status
Use display nqa server status to display NQA server status.
Syntax
display nqa server status [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display NQA server status.
<Sysname> display nqa server status
nqa server is: enabled
tcp-connect:
IP Address Port Status
2.2.2.2 2000 active
udp-echo:
IP Address Port Status
3.3.3.3 3000 inactive
Table 10 Command output
Field Description
tcp-connect TCP connect listening service.
udp-echo UDP echo listening service.
IP Address
IP address specified for the TCP/UDP listening service on the NQA
server.
Port Port number of the TCP/UDP listening service on the NQA server.