R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

75
Field Descri
p
tion
peer interface
Source interface.
If the source interface is not specified, this field is wildcard.
reftime Reference timestamp in the NTP message.
orgtime Originate timestamp in the NTP message.
rcvtime Receive timestamp in the NTP message.
xmttime Transmit timestamp in the NTP message.
filter delay Delay information.
filter offset Offset information.
filter disper Dispersion information.
reference clock status
Status of the reference clock:
• working normally.
• working abnormally.
timecode Time code.
Total associations Total number of associations.
NOTE:
W
hen a device is operatin
g
in NTP broadcast/multicast server mode, usin
g
the display ntp-service
sessions command on the device does not display the NTP session information corresponding to the
broadcast/multicast server, but the sessions are counted in the total number of associations.
display ntp-service status
Use display ntp-service status to view NTP service status information.
Syntax
display ntp-service status [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display NTP service status information.