R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

76
<Sysname> display ntp-service status
Clock status: unsynchronized
Clock stratum: 16
Reference clock ID: none
Nominal frequency: 100.0000 Hz
Actual frequency: 100.0000 Hz
Clock precision: 2^17
Clock offset: 0.0000 ms
Root delay: 0.00 ms
Root dispersion: 0.00 ms
Peer dispersion: 0.00 ms
Reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
Table 13 Command output
Field Description
Clock status
Status of the system clock:
• Synchronized—The system clock has been synchronized.
• Unsynchronized—The system clock has not been
synchronized.
Clock stratum Stratum level of the system clock.
Reference clock ID
When the system clock is synchronized to a remote time server,
this field indicates the address of the remote time server. When
the system clock is synchronized to a local reference source, this
field indicates the address of the local clock source:
• When the local clock has a stratum level of 1, the value of this
field is LOCL.
• When the stratum of the local clock has another value, the
value of this field is the IP address of the local clock.
Nominal frequency Nominal frequency of the local system hardware clock, in Hz.
Actual frequency Actual frequency of the local system hardware clock, in Hz.
Clock precision Precision of the system clock.
Clock offset
Offset of the system clock relative to the reference source, in
milliseconds.
Root delay
Roundtrip delay from the local device to the primary reference
source, in milliseconds.
Root dispersion
Maximum error of the system clock relative to the primary
reference source, in milliseconds.
Peer dispersion
Maximum error of the system clock relative to the reference
source, in milliseconds.
Reference time Reference timestamp.
display ntp-service trace
Use display ntp-service trace to view brief information about each NTP server from the local device back
to the primary reference source.