R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

79
[Sysname-acl-basic-2001] rule permit source 10.10.0.0 0.0.255.255
[Sysname-acl-basic-2001] quit
[Sysname] ntp-service access peer 2001
ntp-service authentication enable
Use ntp-service authentication enable to enable NTP authentication.
Use undo ntp-service authentication enable to disable NTP authentication.
Syntax
ntp-service authentication enable
undo ntp-service authentication enable
Default
NTP authentication is disabled.
Views
System view
Default command level
3: Manage level
Examples
# Enable NTP authentication.
<Sysname> system-view
[Sysname] ntp-service authentication enable
Related commands
• ntp-service authentication-keyid
• ntp-service reliable authentication-keyid
ntp-service authentication-keyid
Use ntp-service authentication-keyid to set the NTP authentication key.
Use undo ntp-service authentication-keyid to remove the set NTP authentication key.
Syntax
ntp-service authentication-keyid keyid authentication-mode md5 [ cipher | simple ] value
undo ntp-service authentication-keyid keyid
Default
No NTP authentication key is set.
Views
System view
Default command level
3: Manage level