R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

89
IPC configuration commands
The display commands in this document display only information about active nodes.
For the HSR6802, HSR6804, and HSR6808 routers in standalone mode, "local node" refers to the
current device or the active MPU.
For the HSR6802, HSR6804, and HSR6808 routers in IRF mode, "local node" refers to the global active
MPU.
display ipc channel
Use display ipc channel to display channel information for a node.
Syntax
display ipc channel { node node-id | self-node } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
node node-id: Displays channel information for the node specified by the node-id argument. In
standalone mode, the value range for the node-id argument is 0 to 13 for HSR6802, 0 to 15 for
HSR6804, and 0 to 19 for HSR6808. In IRF mode, the value range for the node-id argument is 0 to 39.
self-node: Displays channel information for the local node.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display channel information for node 0.
<Sysname> display ipc channel node 0
ChannelID Description
-----------------------------------------------
19 RPC channel
72 Portal Backup Channel
79 DHCP
94 IPC test channel
149 Prehistorical channel, NO.1