R3303-HP HSR6800 Routers Network Management and Monitoring Command Reference

91
Table 16 Command output
Field Descri
p
tion
Dst-NodeID Number of the peer node.
LinkStatus
Link status:
• UP—The connection has been established.
• DOWN—The connection has been terminated.
display ipc multicast-group
Use display ipc multicast-group to display multicast group information for a node.
Syntax
display ipc multicast-group { node node-id | self-node } [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
node node-id: Displays channel information for the node specified by the node-id argument. In
standalone mode, the value range for the node-id argument is 0 to 13 for HSR6802, 0 to 15 for
HSR6804, and 0 to 19 for HSR6808. In IRF mode, the value range for the node-id argument is 0 to 39.
self-node: Displays multicast group information for the local node.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display multicast group information for node 6.
<Sysname> display ipc multicast-group node 6
GroupID Status ChannelID
----------------------------------
8 INUSE 12
Table 17 Command output
Field Descri
p
tion
GroupID Multicast group ID.