R3303-HP HSR6800 Routers Network Management and Monitoring Configuration Guide

152
Ste
p
Command Remarks
7. Configure the source
interface for IPv6
NetStream aggregation
data export.
ipv6 netstream export source
interface interface-type
interface-number
Optional.
By default, the interface connecting to the
NetStream server is used as the source
interface.
• Source interfaces in different
aggregation views can be different.
• If no source interface is configured in
aggregation view, the source
interface configured in system view, if
any, is used.
• HP recommends that you connect the
network management interface to the
NetStream server.
8. Enable the current IPv6
NetStream aggregation
configuration.
enable Disabled by default
Configuring attributes of IPv6 NetStream data
export
Configuring IPv6 NetStream export format
The IPv6 NetStream export format exports IPv6 NetStream data in version 9 format, and the data fields
can be expanded to contain more information:
• Statistics about source AS, destination AS, and peer ASs in version 9 format.
• Statistics about BGP next hop in version 9 format.
To configure the IPv6 NetStream export format:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the version
for IPv6 NetStream
export format, and
specify whether to
record AS and BGP
next hop information.
ipv6 netstream export
version 9 [ origin-as |
peer-as ]
[ bgp-nexthop ]
Optional.
By default:
• Version 9 format is used to export IPv6
NetStream traditional data, IPv6 NetStream
aggregation data, and MPLS flow data with IPv6
fields.
• The peer AS numbers are recorded.
• The BGP next hop is not recorded.