R3303-HP HSR6800 Routers Network Management and Monitoring Configuration Guide

179
has the same IP address as but has other information from the current server, the new configuration
overwrites the previous one.
Exporting flow logs to an IPv4 log server
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the IPv4 address
and UDP port number of the
log server.
userlog flow export [ slot
slot-number ] [ vpn-instance
vpn-instance-name ] host
ipv4-address udp-port
By default, no IPv6 log server is
configured.
Exporting flow logs to an IPv6 log server
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the IPv6 address
and UDP port number of the
log server.
userlog flow export [ slot
slot-number ] [ vpn-instance
vpn-instance-name ] host ipv6
ipv6-address udp-port
By default, no IPv6 log server is
configured.
Exporting flow logs to the information center
Exporting flow logs to the information center occupies device storage space, so use this export approach
only if there are a small amount of logs. Flow logs exported to the information center have a severity level
of informational.
To export flow logs to the information center:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Export flow logs to the
information center.
userlog flow syslog
Flow logs are exported to the log
server by default.
Configuring the timestamp for flow logs
Perform this task to timestamp flow logs in the local time or Coordinated Universal Time (UTC).
To configure the timestamp for flow logs:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A