R3303-HP HSR6800 Routers Security Command Reference

537
Views
System view
Default command level
2: System level
Parameters
group-name: Specifies a name for the GDOI GM group, a case-sensitive string of 1 to 63 characters.
Usage guidelines
A GDOI GM group includes the information that the GM uses to register with a KS, such as the group ID,
KS address, and registration interface.
The device supports 64 GDOI GM groups at most.
Examples
# Create a GDOI GM group named abc, and enter its view.
<Sysname> system-view
[Sysname] gdoi gm group abc
[Sysname-gdoi-gm-group-abc]
Related commands
display gdoi gm
group
Use group to specify the GDOI GM group to be referenced by the GDOI IPsec policy.
Use undo group to remove the GDOI GM group referenced by the GDOI IPsec policy.
Syntax
group group-name
undo group
Default
A GDOI IPsec policy does not reference any GDOI GM group.
Views
GDOI IPsec policy entry view
Default command level
2: System level
Parameters
group-name: Specifies the name of a GDOI GM group, a case-sensitive string of 1 to 63 characters. The
group must have existed.
Usage guidelines
A GDOI IPsec policy can reference only one GDOI GM group. If you configure this command for
multiple times, the last configuration takes effect.
GDOI IPsec policy entries of different GDOI IPsec policies can reference the same GDOI GM group, but
those of the same GDOI IPsec policy cannot.