HP Comware 5 Debug Manual Vol 3

RPR debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging rpr error
Use debugging rpr error to enable RPR error debugging.
Use undo debugging rpr error to disable RPR error debugging.
Syntax
debugging rpr error [ interface interface-type interface-number ]
undo debugging rpr error [ interface interface-type interface-number ]
Default
RPR error debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
Table 1 describes output fields and messages for the debugging rpr error command.
Table 175 Output from the debugging rpr error command
Field
Description
RPR_Error: On interface-type
interface-number, String
System resource operation failed.
The String field content failed to allocate memory.
RPR_Error: On interface-type
interface-number, at String1
span, error packet is received.
String2
Error packets were received.
The String1 field indicates the direction (east or west).
The String2 field describes the detailed reason for errors:
• Invalid frame length. Type: packetType—Frames of invalid length were
received. packetType indicates the packet type, which can be TP, TC,
ATD, echo-response, or echo-request.
• Invalid frame type—Packets of invalid types were received.
308