R3303-HP HSR6800 Routers Configuration Guides Index

load balancing configuration, IPR-232
maintaining, IPR-242
manual soft reset configuration, IPR-235
MP-BGP, IPR-202
MP-BGP (MPLS L3VPN), MPLS-250
MP-BGP address family, IPR-203
MP-BGP extended attribute, IPR-202
multicast VPN configuration, MCAST-222
network optimization, IPR-228
NSR configuration, IPR-240
OSPF sham link (MPLS L3VPN), MPLS-266
peer configuration, IPR-206
peer group, IPR-199
peer group configuration, IPR-207
permitting local AS number to appear in
peer/peer group routes, IPR-225
protocols and standards, IPR-203
QPPB configuration, QACL-101, QACL-103,
QACL-105 , Q ACL-111
redistributing IGP routing information, IPR-212
redistributing OSPF loopback interface route
(MPLS L3VPN), MPLS-290
removing private AS numbers from updates to
peer/peer group, IPR-227
resetting connection (IPv6 MPLS L3VPN),
MPLS-414
resetting connection (MPLS L3VPN), MPLS-302
resetting connection (VPLS), MPLS-217
resetting connections, IPR-244
resetting session (Kompella MPLS L2VPN),
MPLS-175
route dampening, IPR-199
route recursion, IPR-198
route reflector, IPR-199
route reflector configuration, IPR-259
route selection, IPR-198
route summarization, IPR-199
routing policies automatically take effect disable,
IPR-235
soft reset configuration, IPR-234
SoO (MPLS L3VPN), MPLS-267
speaker, IPR-193
specifying fake AS number for peer/peer group,
IPR-225
specifying received route preferred value,
IPR-219
specifying TCP connection source interface,
IPR-210
troubleshooting, IPR-274
troubleshooting peer relationship not
established, IPR-274
tuning network, IPR-228
BGP (loopback interface configuration), IF-88
BGP MDT
configuring BGP MDT peers or peer groups,
MCAST-242
configuring route reflector, MCAST-243
BGP peer
share-MDT establishment in BIDIR-PIM network,
MCAST-232
share-MDT establishment in PIM-DM network,
MCAST-230
share-MDT establishment in PIM-SM network,
MCAST-231
share-MDT establishment in PIM-SSM network,
MCAST-233
BGP-VPNv6
configuring subaddress family routing (IPv6
MPLS L3VPN), MPLS-404
bidirectional
forwarding detection. See BFD
bidirectional forwarding detection. Use BFD
bidirectional RPT building (BIDIR-PIM), MCAST-106
BIDIR-PIM
bidirectional RPT building, MCAST-106
configuration, MCAST-126, MCAST-160