R3303-HP HSR6800 Routers Configuration Guides Index

configuring backup (MPLS TE), MPLS-77
configuring reoptimization (MPLS TE), MPLS-69
configuring route pinning (MPLS TE), MPLS-67
creating tunnel over static CR-LSP (MPLS TE),
MPLS-56
establishing path (MPLS TE), MPLS-41
explicit route (MPLS TE), MPLS-42
forwarding packet (MPLS TE), MPLS-42
MPLS TE, MPLS-42
preemption (MPLS TE), MPLS-42
reoptimizing (MPLS TE), MPLS-43
route pinning (MPLS TE), MPLS-42
traffic characteristics (MPLS TE), MPLS-42
tuning setup (MPLS TE), MPLS-67
cross-subnet
portal authentication mode, SEC-123, SEC-125
C-RP
BIDIR-PIM, MCAST-129
BIDIR-PIM C-RP timer, MCAST-130
configuring IPv6 BIDIR-PIM C-RP, MCAST-344
configuring IPv6 BIDIR-PIM C-RP timer globally,
MCAST-345
configuring IPv6 PIM-SM C-RP timer globally,
MCAST-335
configuring PIM-SM C-RP, MCAST-117
PIM-SM, MCAST-118
cryptographic algorithm
triggering self-test, 60
CSNP (IS-IS), IPR-147
CSPF (configuring MPLS TE), MPLS-59
CST
MSTP, 44
MSTP CIST, 44
MSTP CIST calculation, 46
CT1 interface
clearing statistics, IF-35
configuration procedure, IF-32
displaying, IF-35
error packets diffusion restraint, IF-34
maintaining, IF-35
starting BERT test, IF-34
T1-F interface, IF-38
terminating BERT test, IF-34
CT1 interface parameter
alarm threshold, IF-32
automatic clock mode change, IF-32
bandwidth, IF-32
behavior on the FDL in ESF framing, IF-32
cable length and attenuation, IF-32
clock mode, IF-32
CRC mode, IF-32, IF-46
data inversion, IF-32
description, IF-32
entering synchronous serial interface view, IF-32
framing format, IF-32
interframe filling tag, IF-32
line code format, IF-32
line idle code type, IF-32
loopback mode, IF-32
number of interframe filling tags, IF-32
RAI detection, IF-32
sending remote loopback control code, IF-32
CT3 interface
clearing statistics, IF-48
configuration procedure, IF-45
displaying, IF-48
maintaining, IF-48
CT3 interface parameter
alarm signal detection, IF-46
alarm signal sending, IF-46
automatic clock mode change, IF-46