R3303-HP HSR6800 Routers High Availability Command Reference

113
display rrpp statistics
Use display rrpp statistics to display RRPPDU statistics.
Syntax
display rrpp statistics domain domain-id [ ring ring-id ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
domain-id: RRPP domain ID in the range of 1 to 8.
ring-id: RRPP ring ID in the range of 1 to 64.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If an RRPP ring ID is specified, this command displays the RRPPDU statistics for the specified RRPP ring in
the specified RRPP domain on the current device.
If no RRPP ring ID is specified, this command displays the RRPPDU statistics for all RRPP rings in the
specified RRPP domain.
If a certain port belongs to more than one ring, this command collects and displays its RRPPDU statistics
by ring.
When a ring transits from inactive status into active status, packet counting for the ring restarts.
Examples
# Display the RRPPDU statistics for ring 1 in RRPP domain 1.
<Sysname> display rrpp statistics domain 1 ring 1
Ring ID : 1
Ring Level : 1
Node Mode : Master
Active Status : Yes
Primary port : GigabitEthernet1/0/1
Packet Link Common Complete Edge Major Packet
Direct Hello Down Flush FDB Flush FDB Hello Fault Total
------------------------------------------------------------------------------
Send 16424 0 0 1 0 0 16425
Rcv 0 0 0 0 0 0 0
Secondary port: GigabitEthernet1/0/2