R3303-HP HSR6800 Routers High Availability Command Reference

193
Source IP: 192.168.11.11 Destination IP: 192.168.11.10
Session State: Up Interface: Ethernet1/3/3/1
Min Trans Inter: 200ms Act Trans Inter: 600ms
Min Recv Inter: 200ms Act Detect Inter: 1000ms
Recv Pkt Num: 16927 Send Pkt Num: 17146
Hold Time: 1900ms Auth mode: None
Connect Type: Direct Chassis/Board Num: 1/3
Protocol: OSPF/RSVP/MFW
Diag Info: No Diagnostic
Table 54 Command output
Field Descri
p
tion
Total session number Total number of BFD sessions.
Up session number Total number of active BFD sessions.
Init mode BFD operating mode: active or passive.
session working under xx mode
IPv4/IPv6 BFD session mode:
• Ctrl—Control packet mode.
• Echo—Echo packet mode.
Local Discr Local ID of the session.
Remote Discr Remote ID of the session.
Source IP Source IP address of the session.
Destination IP Destination IP address of the session.
Session State Session state.
Interface Name of the interface of the session.
Min Trans Inter Expected minimum transmit interval configured on the interface.
Min Recv Inter Expected minimum receive interval configured on the interface.
Act Trans Inter Actual transmit interval.
Act Detect Inter Actual session detection timer.
Recv Pkt Num Number of packets received.
Send Pkt Num Number of packets sent.
Hold Time Length of time before session detection timer expires.
Auth mode Session authentication mode: simple, MD5, or SHA-1.
Connect Type Connection type of the interface.
Running up for Time interval for which the session has been up.
Chassis/Board Num Chassis/card maintaining the session.
Protocol Registered protocol.
Diag Info Diagnostic information about the session.