R3303-HP HSR6800 Routers MPLS Command Reference

105
Field Descri
p
tion
Class Type Class type of the traffic on the static CR-LSP.
Bandwidth Bandwidth required by the static CR-LSP.
display mpls te cspf tedb
Use display mpls te cspf tedb to display information about CSPF-based TEDB by specified criteria.
Syntax
display mpls te cspf tedb { all | area area-id | interface ip-address | network-lsa | node [ mpls-lsr-id ] }
[ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
area-id: Area ID. For OSPF, it is in the range of 0 to 4294967295. For IS-IS, it takes the value of 1 or 2.
ip-address: IP address of an interface.
network-lsa: Displays traffic engineering database (TEDB) information in network LSAs.
node: Displays the TEDB information on nodes. If no node is specified, the TEDB information on all nodes
is displayed.
mpls-lsr-id: Specifies a node by its MPLS LSR ID.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display TEDB information in network LSAs.
<Sysname> display mpls te cspf tedb network-lsa
Maximum Network LSA Supported: 500
Current Total Network LSA Number: 7
Id DR MPLS LSR-Id DR-Address IGP Process-Id Area Neighbor
1 8.1.1.2 3.0.0.2 OSPF 100 0 1.1.1.1
2.1.1.1
8.1.1.2
2 2.1.1.1 3.0.0.3 OSPF 100 0 2.1.1.1
3.1.1.1
2.1.1.2
3 3.1.1.2 3.0.0.4 OSPF 100 0 3.1.1.1