R3303-HP HSR6800 Routers MPLS Command Reference

115
Examples
# Display information about MPLS TE tunnels. (The output vary by signaling protocol.)
<Sysname> display mpls te tunnel
LSP-Id Destination In/Out-If Name
1.1.1.9:1024 3.3.3.9 -/GE2/1/1 Tunnel0
1.1.1.9:2048 3.3.3.9 -/GE2/1/2 Tunnel0
Table 54 Command output
Field Descri
p
tion
LSP-ID LSP ID of tunnel.
Destination Destination router ID.
In/Out-IF Incoming/outgoing interface.
Name Tunnel name configured on the ingress node.
# Display detailed information about MPLS TE tunnels.
<Sysname> display mpls te tunnel verbose
No : 1
LSP-Id : *1.1.1.9:23
Tunnel-Name : Tunnel2
Destination : 1.1.1.9
In-Interface : Vlan1
Out-Interface : -
Tunnel BW : 0 kbps
Class Type : CT0
Ingress LSR-Id : *1.1.1.9
Egress LSR-Id : 1.1.1.9
Setup-Priority : 7
Hold-Priority : 7
Sign-Protocol : RSVP TE
Resv Style : FF
IncludeAnyAff : 0x0
ExcludeAllAff : 0x0
IncludeAllAff : 0x0
Created Time : 2011/01/28 09:59:49
No : 2
LSP-Id : 1.1.1.9:23
Tunnel-Name : Tunnel2
Destination : 2.2.2.9
In-Interface : -
Out-Interface : Vlan1
Tunnel BW : 0 kbps
Class Type : CT0
Ingress LSR-Id : 1.1.1.9
Egress LSR-Id : 2.2.2.9
Setup-Priority : 7
Hold-Priority : 7
Sign-Protocol : RSVP TE